My progress on my La Passacaglia continues slowly. In the meantime, I finished some Christmas projects (in March!) and generally enjoyed a break from most sewing.
Since my last Passacaglia post, I’ve added two new rosettes, one large and one small. My original plan was to work on all the large rosettes first to have the best idea of what my finished quilt would look like. I have revised the heck out of that plan! The smaller rosettes are infinitely faster to finish, so I’m trying to pepper those in so I feel like I’ve at least made some progress! Here’s what I have so far:
My 3rd rosette was especially fun because it doubles as a quilt label. My new husband’s last name is Bayer, which he pronounces as “bear.” (I use two syllables.) I incorporated both Bayer and bears into the rosette. And a few hearts. ❤
Here’s a closer view from a progress shot:
And this last rosette is the one I made after starting rosette #3 but before finishing it because it took FOREVER. (I mean every single one of those capital letters!)
As you can see, my blue-and-orange color scheme also incorporates some reds and yellows.
Early on, I made a coloring template for my Passacaglia in MS Word. I didn’t share it because I was concerned about copyright laws and didn’t want to steal the work of a designer. That said, the Passacaglia is everywhere, and others have made their coloring sheets publicly available. Theirs are also better than mine because all the shapes actually line up, haha. If you’re interested in a free La Passacaglia coloring sheet, I used the one I found here.
I know I always underestimate how long it will take me to complete a project, but we’re talking whole new levels with the La Passacaglia quilt. (If you don’t know what quilt I’m talking about, check out my earlier post here.) I worked on it with all my free time last week and only made it through three rings on the first rosette. Now I am finally FINISHED… with the first rosette of many, haha. Here’s my first blue & orange rosette:
It’s big! It takes up an entire café table. The photo below was taken earlier in the afternoon, when I thought I was finished. Then I noticed my error and had to re-sew a section. Can you spot the issue? The lighting was much better for the mix-up than the final version. Bummer!
In case you’re curious, here’s the back side of my La Passacaglia.
I also came up with another fun technique for fussy cutting. In my last post, I described using a wet erase pen on acrylic templates to ensure multiple cuts of fabric have an identical pattern. It worked pretty well. But I thought to myself, If I could just copy the fabric pattern and somehow see through it, I could line things up, and there wouldn’t be the user error of my not marking perfectly or accidentally lifting half the marker off the acrylic with my fingers. That’s when I came up with what might be an even BETTER idea than the wet erase/acrylic method!
Did you have a math class in the 1990s? If so, you might remember your teacher standing at the overhead projector, using his/her wet erase marker to complete math problems that were photocopied onto a transparency sheet. Those transparency sheets are still available for sale, believe it or not. (I got mine here; no affiliation.) I just put my fabric in a copy machine, inserted a transparency sheet, and hit copy at 100%. Do make sure the scale of your copier is correct by lining up the transparency over the fabric after copying the first print.
Fabric and transparency side-by-side, but one is backward (also, reflective surfaces are difficult to photograph)
I photocopied onto paper before using the paper copies to make transparency sheets. I wanted to be sure I got all the important elements on a single sheet first. The paper copy made it easy to try multiple configurations and to test the repeat pattern before cutting into the transparency sheet. For this part, I skipped the seam allowance to see what the finished pieces would look like. When you’re happy with the selection, you can use an acrylic template to cut around the transparency version, then double-stick tape the transparency to the acrylic. From there, just line it up over the fabric to make multiple, identical cuts. What could be easier?! (Reminder: Be sure to include the seam allowance here, even if you skipped it for the step above.)
Of course, this doesn’t work if you don’t have access to a copier, but if you do… BAM! You’re welcome. This method (photocopying fabric onto either paper or transparency) also makes it easy to see whether two images on the fabric are too close together to get separate cuts. (Be sure to include seam allowances.)
You could also use washi tape on the bottom of an acrylic template to hide seam allowances and really see what portion of the fabric will show on the final piece. (You don’t need to see that the outer edges line up with the fabric because you can already see through the transparency!) My first passacaglia rosette was made before I thought of the photocopy/transparency method. I am confident my next few rosettes will be even better! I’ve already started on my second.
Disclaimer: This is going to be a LONG post. I have a few goals:
First, I want to share photos for anyone who wasn’t able to attend QuiltCon this year.
Second, I had a lot of questions about what to expect for my first-ever QuiltCon experience, so I want to share tips for future attendees.
Third, I bought a Janome machine at QuiltCon and thought it might be helpful for others to know how the negotiation process worked. (Spoiler: I paid the price they asked, but it was way below retail.)
Awhile back, I noted I was in the market for a new sewing machine. Fellow members of the DCMQG told me I should consider buying my next machine at a show, that their purchases were made significantly below retail value. That decided it for me: I would use my anticipated savings to attend QuiltCon. It was a bit of a gamble, but it totally paid off! And I had the best time.
Before I go any further, let’s look at some of the awesome quilts in the show. I obviously didn’t photograph them all, but here were some that caught my eye:
The quilts above are: (1) [The American Context #16] Christina’s World by Luke Haynes, (2) Holy Sh*t, Sherlock by Kristy Daum, (3) Woodcut by Holly DeGroot, (4) Wavelength by Lee Heinrich, and (5) Huckleberry by Bryan House Quilts.
A few of the quilts begged for a close-up.
Above is [The American Context #68] Double Elvis by Luke Haynes. I’d always wondered what his appliqué looked like up close!
(A) Bauble by Emily Cier, quilted by Angela Walters; (B) Geometric Rainbow by Nicole Daksiewicz; and (C) Eggs and Darts by Amanda Leins, pieced by Susan Bishop.
The next four quilts have unknown makers but are all from the collection of Bill Volckening:
Okay, now where to begin with my experience? I got into Austin, Texas, late Friday night, arriving around 1am.
Pro tip: I didn’t have extra vacation time, but if you can swing it, I definitely recommend arriving at the start of the show. I missed the Moda Party, some of the Cotton + Steel fabric I had hoped to buy was sold out, I missed some of the workshops/lectures I would have found most interesting, and I missed certain other promotions. It wasn’t the end of the world, but I think the extra few days would have been worthwhile.
Registration on Saturday started at 8am. The process was professional and easy. I scanned my barcode (received in an email and printed out at home), although you can also search by name. Then my official nametag was printed, and I received a sweet swag bag.
Pro tip: Each nametag has a barcode that is used to scan the attendee into sessions (s)he has registered for.
I showed up promptly at 8am. There was no line. I was finished in less than 3 minutes. My workshop didn’t start until 9am, and the exhibition hall didn’t open until 10am, so I went to check out the contents of my swag bag, review my schedule, and get a coffee. Here’s a photo of some of the contents of the swag bag (charm packs of fabric didn’t fit into the photo):
My first workshop was English Paper Piecing with Katy Jones (on Instagram as @imagingermonkey… but you already knew that!). I thought the session was great. She picked a project with enough different shapes so skills will translate to other projects. There was fairly minimal instruction. She showed us how to do each shape the first time, then let us make repeat pieces. Once we’d worked for awhile, she showed us how to connect the pieces. The cool thing about the class was having someone check our work and give one-on-one feedback (increase stitch length, don’t pull so tight, etc.). The class size was less than 30 people, so we all had the opportunity to ask questions. As Katy joked, I feel confident in my new English Paper Piecing skills because I learned them from someone English!
Pro tip: Full-day sessions have a two-hour lunch break from 12pm-2pm. Vendors are in their booths during this time, and the quilt show is open. There are also some demonstrations that are open to all attendees.
The workshop was scheduled from 9a-5p. Honestly, I wasn’t sure how I would do handwork for that long without getting squirmy. I needn’t have worried. First, there was a lunch break. (This also answered for me when I would contact a sewing machine sales rep about getting a good deal.) Second, Katy said she would buy a drink for anyone who made it even halfway through the project; she didn’t think it was possible. I’m hugely competitive, so that was all I needed to hear. I worked like a madwoman. I got close but didn’t make it. Here we are with the work I completed in class:
(Dunno why my face was flushed like I just ran up the stairs to the top of the Empire State Building, but a little B&W adjustment fixed that!)
Katy teased me about the template I made with Microsoft Word and brought to class. But I know it made me cool, haha.
During class, I learned that Katy’s magazine, QuiltNow, is finally being sold at Barnes & Noble in the U.S. I haven’t seen it in stores yet, so I’m really excited to get my hands on a copy!
I had my sights set on a Janome Horizon Memory Craft 8900 and told my fellow EPP classmates while we stitched away. They had excellent news! A Janome rep visited all the workshops a day or two before I arrived and said the 8900 was the machine being used at the show. Attendees could get a machine (used in workshops for the 4 days of QuiltCon) at an extremely reduced rate. The only “catch” was that only a limited number of machines were available.
If you think talking about money is gauche, please skip the next paragraph. However, it’s difficult to find sewing machine prices online, you don’t always have a ton of local vendors to be able to shop around, and so I appreciated reading past bloggers’ experiences. I want to share mine in case it helps someone else.
I already knew the Manufacturer Suggested Retail Price (MSRP) had gone down $1,000-2,000 to $4,000 recently. Other bloggers mentioned getting their machines at a show for $2,500 or $2,300. I was hoping for a rate like that. Instead, I got my machine even less expensively… for just under $1,900!!! The rate included shipping to my house and was either inclusive of taxes or not subject to taxes (because Texas).
After the show, all the machines are going back to the local rep’s warehouse, and they’ll ship from there within the week. I also bought a table to go with the machine. They’re not sold by the same company, and the tables ordered for QuiltCon didn’t arrive in time, so that will ship approximately 3-4 weeks from now. I’m sure the rate was somewhat reduced, but nothing near the 50% discount on the machine!
The machine-buying experience, which I’d planned to span the 2-hour lunch break, was complete in less than 15 minutes. (When I asked the rep whether it was the fastest sale he’d made, he responded with a curt, “No.”) I have to admit that, as awesome as QuiltCon was, the next few hours were a tiny bit anti-climactic after the awesomeness of buying a machine. For hundreds less than anticipated. With a table into the bargain.
QuiltCon was surprisingly smaller than some of the other shows I’ve attended (blogged here and here). That said, I felt the vendors present were more targeted to the type of quilting I enjoy, so the smaller size wasn’t at all a detriment. (Example: I’m not the biggest fan of batiks, so it was nice to have one or two batik vendors instead of having to navigate between what seemed, at other shows, like a million of them.)
One of the most-photographed booths at QuiltCon had to be Cotton + Steel. It was divided into sections. To the far left was the Tinsel line and a mock fireplace. To the right of that was a sewing station. You could pick through boxes of C+S “scraps” (some of which were bigger than FQs) to make either a pincushion or a headband. To the right of that were the apparel fabrics. And on the far right was a temporary tattoo booth and the B&W prints, many of which were part of a Halloween theme.
I was most excited about the Tinsel and Black & White lines of fabric when I arrived, but Melody Miller personally pointed out to me some new rayon fabric that will make great apparel (it felt amazing and draped beautifully), so now I’m equally excited about those. This also comprised my most embarrassing “sewlebrity” experience. I got completely tongue-tied. I think all I told her about the rayon was, “This is great.” Then I went and stood in line for a temporary tattoo—not because I was disinterested in the fabric or talking with Melody Miller, but because I knew I couldn’t be counted on to say anything more intelligent than that! Talking with Sarah Watts about a temporary tattoo was easier because at least there was a clear course for the discussion – “I like this tattoo best. Here’s my left arm. Thank you.” Haha. I did stick around long enough to learn that B&W comes out in April, other lines in May, and Tinsel in July.
Pro tip: You will get to see a lot of the new fabric lines at QuiltCon, but you won’t actually be able to buy them yet. Manufacturers make display items from the strike-offs to show their lines before all 3,000+ yards are printed and available to the public.
All the C+S girls were friendly and gracious. One of the cutest QuiltCon moments for me was watching them help some up-and-coming quilters sew their projects at the sewing station in the booth. Here are Alexia and Melody helping:
Alexia also took a photo with me. I am so excited!!! You might recall that I sewed her Marcelle Medallion pattern awhile ago. It is still my favorite quilt pattern.
I was also really excited to see a photo of my Pixelated Panda quilt on display in the YouPatch booth. Andi was kind enough to take a photo with me and a photo of the quilt:
In terms of other booths, there was great fabric from all the vendors, but I think the one with the widest selection on the bolt and therefore the longest lines was Island Quilter. Many of the other vendors focused more on half yards or FQs. It makes sense: pre-cut fabric is way easier to transport. It was also a nice way to get a wide vareity of fabrics.
Kona Cotton’s booth had a popular game where you could try to name 30 preselected fabric colors in 2 minutes. After your guesses, you could spin a wheel to win a pin, a FQ, or a color card. (I got a pin.) Elisabeth Woo was the rep by the color cards when I was there, and I had another sewlebrity blank-out moment. I’m blaming this on the adrenaline crash after buying my new sewing machine for such a fantastic value!
Pro tip: Check in advance which booths are manufacturers versus retailers if you’re looking to buy something specific. Aurifil’s booth was right next to the Kona prize wheel. They had a lovely display, hosted a game with prizes, and, as sponsors, provided nice things in the swag bag, but I was surprised you couldn’t buy vast quantities of Aurifil thread on-site at the Aurifil booth. Similarly, you couldn’t buy C+S fabric at the C+S booth. Both were sold at the booths of their retailers. However, they were great about directing you to the appropriate booths.
After my EPP class, I also attended the keynote by the quilters of Gee’s Bend. It wasn’t at all what I expected! Instead of talking exclusively about technique, they also talked about their experiences growing up and sang songs, my favorite of which was, “Swing Low, Sweet Chariot.” Mary Ann Pettway is the head of the group. She said she works on many projects at once. If someone wants to buy a quilt of hers, she says, “Go ahead and pick out your favorite of my WIPs. If you can wait 2 years, I’ll get around to it!” Haha. The next day, I ran into her on the floor of the quilt show, and she took a picture with me!
The coolest part was that she wanted to show us the label on the back of her quilt. As attendees, we obviously aren’t supposed to touch the quilts, but she pulled up a corner to our audible gasps. She said, “It’s my quilt! I suppose I can touch it.” She was friendly and so funny!
After the keynote, I went out to explore Austin, settling on Stubb’s BBQ for dinner. I think moving QuiltCon to other cities is a nice idea (the next event is in Pasadena, and the one after that is in Savannah) so more people can attend locally, but am sad that not everyone will experience Austin. It didn’t feel like other Texas cities where I’ve spent significant time (Houston, San Antonio, Dallas). I think a whole blog could be—and probably is—dedicated just to the facial hair of Austin. Ginormous beards were the norm. I saw some interesting variations, too. One guy dreadlocked his beard and tied up the strands at the top of his head. Another had a waxed moustache that stuck out at least 3 inches past his face on each side. (He also wore a top hat.) Studded jackets and military gear were everywhere. I noticed that although some of the style is “tough,” the people I talked with were universally friendly. I loved that.
I was back to my hotel around 8.30pm. Probably I should have gone out with other attendees, but I was exhausted! It was weird. I know I got in late the night before, but I spent almost the whole day sitting in one spot, working on EPP. That’s not exactly exhausting work! However, I noticed the same thing the following day: being bone-tired as soon as the events were finished for the day.
Pro tip: For this reason, I suggest traveling with or meeting a specific friend so you are forced to make the most of your time. I didn’t fight it and instead got halfway through my EPP project by staying in.
The next day, I already knew that the vendor hall/quilt show wouldn’t open before my workshop, so I got a later start. My class was Compositional Drawing with Krista Withers (on Instagram @lolablueocean). It was fantastic!
My current Singer machine is great for piecing but is a total pain for quilting. It is difficult to get the tension even on both sides, so I’ve been resigned to straight line quilting, and even that has unfortunate puckering for any crossed lines. There’s also no speed control, and the foot pedal sometimes stalls, then drives about 100mph. Needless to say, I am SO excited about getting a new machine, and this class was perfect for helping me know where to start with quilting.
Krista’s method (which I won’t describe in detail since it’s not mine to share) involves breaking the quilt into sections and then quilting those sections across the quilt. It’s weird, but I actually felt a sense of relief in the class, like, “Wow, I’m not going to have to figure this out on my own once my machine arrives.” Watching her do her thing was my favorite part of the class.
She assured us we can develop muscle memory in quilting. I hope to goodness that’s true. I need the help. Since my flight was canceled in the middle of class, I spent a lot of time on phone with the airline and skipped using my ruler for most of the session to save on time. My test piece is UGLY as a result. Seriously. Still, I got great ideas to bring home. We also got some plastic to practice with in the course kit, so I will be drawing on the plastic (set on top of the fabric) over and over before my new machine arrives!
At the end of class, Krista also agreed to take a photo with me.
My afternoon lecture on Sunday was the time slot I was most excited about. I attended Heather Ross’ discussion about what she’s learned over 20 years of designing fabric. I don’t plan to start a line or anything, but I am a huge Heather Ross fan (not just the fabric; her books are SO worth reading!) and found that most of the concepts she discussed apply equally well to creative ventures more broadly. I am impressed any time a speaker can have a “conversation” in a huge room with an audience. It felt a lot more intimate than it was—although it was a smaller session than I’d expected. Heather’s lecture was funny, heartfelt, informative.
Pro tip: The show is WAY emptier the last afternoon as everyone heads for the airport. If the stuff you want to buy isn’t sold out, it’s a much quieter time to make purchases.
After the lecture, I went to her book signing at the Stitch Lab booth. I’m on my fourth copy of How to Catch a Frog since I keep recommending and lending it to people. I would buy the book twice as many times again… although I won’t be lending out this copy:
My favorite essay in the book is about the Polar Bear Plunge. Her husband is the hero of the story, and I read it while wedding planning, so it stuck with me in a big and happy way. Of course, when she asked if there was anything in particular I would like her to draw, I realize in hindsight that a strawberry or cat or flower or frog or ANYTHING featured in her fabric lines might have been a more obvious choice. But I just love this book and the sketch! After my book was signed and I was already walking away with a big dumb grin on my face, she asked, “Do you want a picture?” “Um… YES!”
The best part about the book signing was obviously the book signing experience itself. But the next best thing was seeing who else was in the line with me. It was almost like scrolling through my Instagram feed of all-stars!
Heather’s new collection is called Tiger Lily by Windham Fabrics. She said it should be in stores in July. A FQ bundle arrived at the Windham booth just before her lecture, and I stopped by to see it after the book signing:
It was still wrapped with a bow when I saw it, but check the Instagram feed of @emmylizzy to see it spread out. You can at least see the colors in this photo. We also got to see a few sneak peaks during the lecture, and I’m really excited about the Climbing Trees print. Heather said it was one of the more difficult prints to design since it includes lines (vertical lines of tree trunks). It’s hard to see much of it as just one FQ (guess I’ll just have to buy some yardage!), but it looks incredible! Many thanks to Windham for the charm packs of Far, Far Away from when I stopped to coo over Tiger Lily.
And with that, QuiltCon was over. My flight situation didn’t really resolve itself. Due to weather, I was delayed a day. The silver lining is that late last night, I finished my EPP project! Hooray for one less WIP! I still have to make it into a cushion/pillow cover and quilt it with some contrasting thread, but it was fun.
Now I’m thinking about starting a La Passacaglia quilt. Sewing all 2900 pieces by hand. Because I’m insane. I may have already invested a small fortune on the pattern… although, compared with competitors’ prices, my purchase at Paper Pieces was reasonable. I even got 20% off by Googling a discount code – EPPFB. Until Paper Pieces bought 200 copies of the book, it was difficult to get in the U.S. So I’d rather have the option to spend a lot of money to get the stuff I want than not have that option. Besides, my husband is perfectly content with ramen noodle dinners, haha.
Katy mentioned La Passacaglia as the ultimate EPP project in her class, and Jenny Fox-Proverbs from Love Patchwork & Quilting magazine, in conjunction with the C+S team, gave a demonstration of how awesome each cog of the quilt can look.
As many photos as I’ve included in this post, there are so many moments I didn’t photograph. I saw a ton of designers (of fabric, quilt patterns, and otherwise) I admire. I didn’t go out of my way to run into them. In fact, like I said above, I was so tongue-tied that I needlessly avoided some. But just to give you an idea of the awesomeness of QuiltCon, I saw the following people with my own two eyes: Katy Jones, Krista Withers, Katy Jones, Alison Glass, Nydia Kehnle, Tula Pink, Alexia Abegg, Melody Miller, Sarah Watts, Rashida Coleman-Hale, Kimberly Kight, Denise von Minden, Holly DeGroot (@bijoulovely), Heather Jones, Alex Veronelli, Gemma Jackson (@prettybobbins), Jen (from Love Patchwork & Quilting magazine), the quilters of Gee’s Bend, Lizzy House, Sherri Lynn Wood, Kristi McDonough (@schnitzelandboo), Cat (@hellofromcat of Cat and Vee), Elisabeth Woo, Matt Wheeler, Andi (from YouPatch). I’m sure there are more I can’t remember at the moment; my method of listing them was a casual scroll through my IG feed. I might be bragging, but that’s not my intent. What I really want to illustrate is just how accessible the entire quilting community is at QuiltCon! It was amazing!
I blogged about the QuiltCon registration process here. I hope to review my new machine soon. If you have other questions, I’ll be happy to try to answer them in the comments section. I’m not sure I’ll ever be lucky enough to attend another QuiltCon (I did just spend a bunch of money on a new machine, after all), but this was a really great experience. Thanks to the MQG for putting it together!
East Dakota Quilter 