I found an amazing stuffed chicken sewing project on Pinterest but was disappointed when the link stopped working. Other users reported inappropriate content. However, I had no trouble with the link to the blog’s main site (which I typed in manually), and I was able to view older posts until I eventually found the chicken pattern here.
Since the website is in Chinese, I thought it would be helpful to provide the English-version tutorial. I am NOT trying to take credit for creating the pattern, just trying to make it available in the English-speaking market. I could not find the link to Sunny’s Lovely Quilt that is listed (via photos) on the Chinese site and on the chicken pattern itself. If someone finds the link and discovers this tutorial already exists in English, please let me know! We don’t want any copyright violations around here! In this spirit, I also did not include photos in this tutorial of anything that already appeared in the original link.
Download the pattern on the original website, then follow these instructions. (Note: I re-sized the chicken to fit a printout of 11 x 17” because I wanted it bigger.) All seams are ¼ inch unless otherwise specified.
Materials needed:
Cotton fabric (different colors for head, wattles/comb, beak, outside of chicken, and lining)
White felt (I used a combo of interfacing or batting instead)
Beads for eyes
Filler of your choice (I used polyester stuffing)
Needle, thread, scissors, etc.
Instructions
1. Print the pattern four times.
2. Add a seam allowance. I measured ¼” from each line and did a connect-the-dots thing, but I’ve seen you can also tape two pencils together and draw along the lines (the pencil tips will be approximately ¼ inch apart).
Trace the chicken pieces as follows:
On the first printout, draw along the side of the beak, wattles, and comb that connect to the chicken body. Continue by tracing along the rest of the pieces. You can also draw along the entire chicken bottom on this printout.
On the second printout, draw along the side of the chicken head that connects with the body. Continue around the rest of the chicken head.
On the third printout, draw along all edges of the chicken body (excluding the connecting pieces you have already traced). On this page, I also traced around the beak. There was slight overlap, but I traced the small beak onto another piece of paper rather than printing a fifth chicken.
On the final printout, trace along the entire chicken body including the head but excluding all other pieces.
2. Cut out all the pieces. This is your final pattern.
3. Cut the following pieces of fabric:
Head: 4 pieces with two reverse
Body (no head): 2 pieces for outside of chicken with one reverse
Body (with head): 2 pieces of lining with one reverse
Bottom: 2 pieces consisting of one outside piece and one lining piece
Beak, wattles, and comb: 2 pieces each with one reverse each
On the body (lining) pieces, trace the wing outline using the water- or air-soluble ink of your choice. Do the same for the X shape on the bottom lining piece.
4. Cut off the seam allowance for the body (with head) and bottom pattern pieces. Cut one bottom piece plus one normal and one reverse body piece of white felt. These should be a quarter inch smaller than the fabric pieces on all sides. (I used the instructions to cut interfacing and batting instead of felt.)
A photo of the pieces you should have appears on the original website.
5. Sew along the sides of the beak, wattles, and comb that do NOT connect with the body with right sides together. Turn the pieces right-side-out and stuff. Baste along the sides that will connect to the body to keep stuffing in. (This is pictured on the original site.)
6. Sew one head piece to the corresponding body piece (outside piece). Repeat for opposite side of chicken.
7. Layer one body piece with head added (outside) and corresponding lining piece right sides together. Sew along the edges, leaving about 2” along the bottom unsewn so you can flip the chicken right-side-out. After flipping, insert the felt lining and sew the 2” hole closed. Repeat for opposite side of chicken.
8. Sew along the wing outline and remove the line. (You are basically quilting the wing. I added feathers to my wing shape.)
9. Repeat steps 7-8 for the bottom piece, layering the outside and lining pieces, sewing all but 2 “, flipping right-side-out, inserting felt, closing the hole, and quilting the X.
10. With the two remaining head pieces, sew along outside (leaving a hole), stuff, and close hole. This will be called the “head stuffer” in step 13.
11. Pin comb, beak, and wattle to the lining side of one quilted body piece. Sew using slightly less than a ¼” seam (so the stitching won’t show when you sew the two body pieces together). This is pictured on the original site.
12. Place outside sides of body together. Sew from the tip of the tail to the bottom of the chicken, but not along bottom. Sew from the back of the head, over the top of the head, to the bottom of the chicken. Do not sew the back or bottom of the chicken! All seams in this step should be as close to the edge as possible.
13. Put the “head stuffer” into the chicken head and place one eye on either side of the chicken. Using a tapestry or other long needle, connect the eyes through the head stuffer to keep it in place.
14. Pin the bottom piece to the chicken and sew around it. Because I am still pretty new to curved lines, mine didn’t turn out perfectly, and I can’t tell whether it’s a pattern issue or a sewing issue. (My oval for the bottom was too big.) I suggest checking the size of your oval before sewing to the chicken. Still, it’s pretty cute – and it’s lined with leftover bird fabric from a baby quilt I made.
Uses:
The chicken was originally intended to hold eggs, according to the earliest pinner on Pinterest, but I will use it to hold chicken bean bags from this tutorial. The goal is to play this game or this game at the park with my cousin and her kids when they visit later this spring.
If you have questions, please leave a comment. Thanks for stopping by!
East Dakota Quilter 